spec no: dsal3683 rev no: v.5b date: mar/17/2015 page: 1 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000853 3.0mmx1.0mm right angle smd chip led lamp part number: APBA3010SYKCGKC-GX super bright yellow green features z 3.0mmx1.0mm right angle smt led, 2.0mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000 pcs / reel. z moisture sensitivity level : level 3. z tinned pads for improved solderability z rohs compliant. descriptions z the super bright yellow device is made with algainp (on gaas substrat e) light emitting diode chip. z the green source color devices are made with algainp on gaas substrate light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. yellow yellow
spec no: dsal3683 rev no: v.5b date: mar/17/2015 page: 2 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000853 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. 3. luminous intensity value is traceable to the cie127-2007 compliant national standards. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to the cie127-2007 compliant national standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APBA3010SYKCGKC-GX super bright yellow (algainp) water clear 80 120 green (algainp) 40 70 140 symbol parameter device typ. max. units test conditions peak peak wavelength super bright yellow green 590 574 nm i f =20ma d [1] dominant wavelength super bright yellow green 590 570 nm i f =20ma ? 1/2 spectral line half-width super bright yellow green 20 20 nm i f =20ma c capacitance super bright yellow green 20 15 pf v f =0v;f=1mhz v f [2] forward voltage super bright yellow green 2 2.1 2.5 2.5 v i f =20ma i r reverse current super bright yellow green 10 10 ua v r = 5v parameter super bright yellow green units power dissipation 75 75 mw dc forward current 30 30 ma peak forward current [1] 175 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsal3683 rev no: v.5b date: mar/17/2015 page: 3 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000853 APBA3010SYKCGKC-GX super bright yellow
spec no: dsal3683 rev no: v.5b date: mar/17/2015 page: 4 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000853 green
spec no: dsal3683 rev no: v.5b date: mar/17/2015 page: 5 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000853 APBA3010SYKCGKC-GX reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsal3683 rev no: v.5b date: mar/17/2015 page: 6 of 6 approved: wynec checked: allen liu drawn: p.cheng erp: 1203000853 packing & label specifications APBA3010SYKCGKC-GX terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datas heet. if customer usage exceeds the specified limits, kingbright will not be resp onsible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
